| Radified Community Forums | |
|
http://radified.com/cgi-bin/yabb2/YaBB.pl
Rad Community Technical Discussion Boards (Computer Hardware + PC Software) >> Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board >> Question on restoring ghost image from xp http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1142740980 Message started by illusions on Mar 18th, 2006 at 10:03pm |
|
|
Title: Question on restoring ghost image from xp Post by illusions on Mar 18th, 2006 at 10:03pm
Hi, I have the following partition
hidden partition drive 1 partition 1 ... FAT32 3gig active partition drive 1 partition 2 ... NTFS 5 gig window xp secondary partition drive 1 partion 3 ... NTFS 70 gig Is there a way where i can reboot from xp and run a batch files on dos to restore the ghost image? drive 1 partition 1 has ghost.ext gdisk.exe backup.gho autoexec.bat config.sys my autoexec.bat is as follows ;unhide drive 1 partition 1 gdisk 1 /-hide /p:1 ; dump ghost image ghost.exe -clone,mode=pload,src=1:1,dst=1:2 -FX - RB -SURE or ghost.exe -clone,mode=pload,src=c:\backup.gho,dst=1:2 -FX - RB -SURE ; hide drive 1 partition 1 and reboot gdisk 1 /hide /p:1 /r Please advice and check if the command line are correct. Thanks |
|
Title: Re: Question on restoring ghost image from xp Post by NightOwl on Mar 20th, 2006 at 12:41am
illusions
If Ghost in DOS can see the *hidden* partition as a *source* or a *destination* partition, then you probably do not need to worry about *unhiding* and *hiding the partition--you can save to and read from the *hidden* partition! Boot to DOS and see how Ghost identifies your various partitions--then adjust your command line using that information. |
|
Radified Community Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |