Radified Community Forums | |
http://radified.com/cgi-bin/yabb2/YaBB.pl
Rad Community Technical Discussion Boards (Computer Hardware + PC Software) >> Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board >> USB ext hdd norton ghost 10.0 http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1156155292 Message started by Hellgore on Aug 21st, 2006 at 5:14am |
Title: USB ext hdd norton ghost 10.0 Post by Hellgore on Aug 21st, 2006 at 5:14am
Hi,
Not sure if this is usefull for anybody but me and there might be a solution ut there but i didnt find any. The problem i have is that i want to clone a laptop disk to usb2.0 ext hdd and then from this hdd to another laptop so that i will have 2 running laptops with the same configuration and system. When i run ghost and clone to Ext hdd everything works perfectly but when i then start the other comp with the floppys i have the problem that the usb drive is not norton initialized or whatever it says. and when i choose to initialize the disk it runs a process and the PC gets stuck. I have tried two times and ever made a new floppy but it gets stuck at the same place every time. It seems as there is a frame coming up since i can see some kind of square figure which is not completely drawn. I can see the Ext hdd and everything but Norton ghost wants to initialize it which seems to be the problem. Is there some way i can initialize the disk before running the dos program or can i just do something else to solve this problem? Thanks in advance!! |
Title: Re: USB ext hdd norton ghost 10.0 Post by Ghost4me on Aug 25th, 2006 at 5:04pm
Hellgore,
I see that no one has posted any help to your question. Have you resolved the problem or still need help? In Ghost 10, you don't start the PC with floppies; you use the Ghost 10 Recovery CD and boot from the CD, not floppies. Does that help? |
Title: Re: USB ext hdd norton ghost 10.0 Post by Pleonasm on Aug 26th, 2006 at 11:49am
Hellgore, it may be helpful to review this thread that discusses the installation of an image (aka "recovery point") on PC #2 which was created on PC #1.
|
Radified Community Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |