Radified Community Forums | |
http://radified.com/cgi-bin/yabb2/YaBB.pl
Rad Community Technical Discussion Boards (Computer Hardware + PC Software) >> Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board >> Ghost 2003 http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1165887052 Message started by bionicle001 on Dec 11th, 2006 at 7:30pm |
Title: Ghost 2003 Post by bionicle001 on Dec 11th, 2006 at 7:30pm
Error:
Internal Error 10040 - an internal inconsistency has been detected. What lead up to the error: Details: Restoring from Image file on DVD Booting from bootable DVD that contains .gho file and first .ghs file. What lead up to the error: Ghost runs for a while and then asks for next file in span. Point to .ghs on current DVD - Ghost continues to run - gets to 77% and then error appears. Things I have tried: I have run integrity check on these files - successfully -fni -crcignore -noide Also went into the bios and change the SATA settings to compatability mode. Additional details: IBM T60 dual core 100GB HDD SATA NTFS- format CD/DVD internal (ghost finds drive) USB external HDD (ghost finds drive) Side note: I have another ghost image backup on the external USB drive. If I boot using the DVD and point to that .gho file - ghost runs and then gets Application error 10008 - unexpected end of file I have run integrity check on these files - successfully I suspect that the issue has to due with the fact that I am restoring images to an SATA drive. Because both ghost images (that are different) and on different media have errors in the process indicator. |
Title: Re: Ghost 2003 Post by bionicle001 on Dec 11th, 2006 at 8:53pm
I retract the earlier statement:
I have run integrity check on these files - successfully Both ghost image backups show errors during the integrity check. |
Title: Re: Ghost 2003 Post by NightOwl on Dec 11th, 2006 at 10:42pm
bionicle001
You need to clarify: Quote:
Quote:
A *successful* Integrity check means you run it and there are *no* errors, but you then say both image sets *show errors during the integrity check*!--can't have it both ways! Couple thoughts--probably will not solve the problem but need to *rule out* the variables-- 1. Are you loading *himem.sys*--some systems need that memory manager for successful Ghost procedures--and the errors occur in the middle of a Ghost procedure based on previous posts in the forums here. 2. Is it possible to place all the image files in the same directory on a secondary HDD and do the Ghost procedure from there--eliminates the speed differential of different media--I know it says you can save Ghost images to all those different destinations, but.... 3. *IBM T60 dual core*--are there any known issues when running a DOS program with a *dual core* processor--are they able to scale to the older DOS environment--other DOS programs work okay? |
Radified Community Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |