Radified Community Forums | |
http://radified.com/cgi-bin/yabb2/YaBB.pl
Rad Community Technical Discussion Boards (Computer Hardware + PC Software) >> Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board >> Using Ghost Boot CD to Image to USB Ext HD http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1176184985 Message started by ScottyBee on Apr 10th, 2007 at 1:03am |
Title: Using Ghost Boot CD to Image to USB Ext HD Post by ScottyBee on Apr 10th, 2007 at 1:03am
I have a laptop with no floppy drive so I found the link that NightOwl provided:
http://nightowl.radified.com/bootcd/bootcdintro.html to be invaluable. I was able to get the boot CD to work and successfully created my first image using Ghost 2003!! I would find it highly valuable if I had USB support built in to the boot CD that the above link had me create. Would it be easy for me to add a few lines of code into the autoexec.bat or config.sys file to add USB support? It would be nice to have an additional medium to back up to. I read some of the previous posts on USB support but was not able to quite figure out how I might apply it in this situation. Any help would be greatly appreciated. Thanks, Scott |
Title: Re: Using Ghost Boot CD to Image to USB Ext HD Post by NightOwl on Apr 10th, 2007 at 1:28am |
Radified Community Forums » Powered by YaBB 2.4! YaBB © 2000-2009. All Rights Reserved. |