I have a Gigabyte GA-X79-UD3 LGA 2011 Intel X79 running Windows 7 SP1 Professional 64Bit with a couple RAIDS defined under the X79 chipset. I used the normal Intel 64 Bit raid drivers. The same drivers (except 32 Bit) which are available from Norton under the "Latest Intel Storage Driver RAID.zip". I have created a custom recovery disk and included those same drivers as well as additional 32 Bit drivers for a network card and an additional LSI raid card. The custom recovery disk did not see the network or the LSI card prior to adding those drivers so I'm pretty sure that I'm adding them properly because now it does, yet it does not see the Intel RAID.

When I query the Device Manager for driver details. It reports two drivers installed: iaStorA.sys ans iaStorF.sys.

The ZIP mentioned above has "iaStor.sys". I thought this was the correct driver.

Suggestions?

Thank you.

@ taotlg

The Ghost 15 SRD is based on Vista 32-bit so you need Vista 32-bit drivers. While you are experimenting you could test the drivers on a USB flash drive. In the SRD use Utilities, Load a Driver, browse to the *.inf on the flash drive. After you find the correct driver it could be added to your CD.

Good luck.