Radified Community Forums

Radified Community Forums
http://radified.com/cgi-bin/yabb2/YaBB.pl Rad Community Technical Discussion Boards (Computer Hardware + PC Software) >> Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board >> Re: Have successful image, how to get past A:\GHOST>? http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1361467660 Message started by NightOwl on Feb 21^st, 2013 at 12:09pm

Title: Re: Have successful image, how to get past A:\GHOST>?
Post by NightOwl on Feb 21^st, 2013 at 12:09pm

@ 26kick

Are you using Ghost 2003's Windows interface to set up the image creation, letting that interface close down Windows, re-boot to DOS, and you are now *stuck* at the A:\ prompt?

Or, are you booting from a floppy disk with Ghost 2003 on the floppy?

If you have used Ghost 2003 on this system in the past, what has changed since you last successfully used Ghost 2003? Especially, has anything changed as far as the HDD controllers, type of HDDs, have you switched from standard HDD setup to a RAID setup, etc.?

Title: Re: Have successful image, how to get past A:\GHOST>?
Post by 26kick on Feb 21^st, 2013 at 12:13pm

Nightowl,

Thank you so much for taking the time to respond.

My problem is solved!

Matter of fact, I never had a problem at all, and I'm sorry I bothered the forum.

Nothing has changed in my system, all I had to do was get the balls to CTRL+ALT+Delete, remove the floppy and I'm back into WinXP pro.

Thanks again, you've come to my aid in the past as well and it's much appreciated!

I deleted my post because I thought I had no responses and I'm embarrassed.

Best,

26kick

Title: Re: Have successful image, how to get past A:\GHOST>?
Post by NightOwl on Feb 21^st, 2013 at 12:59pm

@ 26kick

Quote:

I deleted my post because I thought I had no responses and I'm embarrassed.

No need to be embarrassed! You should see some of my posts over the years :-[ !

Glad to hear you're back up and running....