Welcome, Guest. Please Login
 
  HomeHelpSearchLogin FAQ Radified Ghost.Classic Ghost.New Bootable CD Blog  
 
Page Index Toggle Pages: 1
Send Topic Print
Verifying that a Ghost 9 restore works fine (Read 7400 times)
Guy...
Ex Member




Back to top
Verifying that a Ghost 9 restore works fine
Jan 13th, 2007 at 10:46am
 
Just to be on the safe side I want to try and restore my drive image (from Ghost 9) into a different drive.
I'll disconnect the original drive (so I won't overwrite it by mistake) and only leave the backup drive where the drive image is at.

Will it cause any problems, like mixing the drive letters?
Will the letter of the original drive still be C: after I disconnect the drive that I restored to?

Thanks
 
 
IP Logged
 

Rad
Radministrator
*****
Offline


Sufferin' succotash

Posts: 4090
Newport Beach, California


Back to top
Re: Verifying that the restore works fine
Reply #1 - Jan 14th, 2007 at 12:32am
 
this is a wise practice. but i've only done it with ghost 2003. let's wait to hear from some ghost 9 gurus.
 
WWW  
IP Logged
 
Guy...
Ex Member




Back to top
Re: Verifying that a Ghost 9 restore works fine
Reply #2 - Jan 15th, 2007 at 7:10am
 
Well, I tested the restore and I'm happy to say it worked fine.

Smiley
 
 
IP Logged
 
Rad
Radministrator
*****
Offline


Sufferin' succotash

Posts: 4090
Newport Beach, California


Back to top
Re: Verifying that a Ghost 9 restore works fine
Reply #3 - Jan 15th, 2007 at 10:53am
 
good feeling, huh? .. to know that it will really work when you really need it. peace of mind.

how did you do it?
 
WWW  
IP Logged
 
Guy...
Ex Member




Back to top
Re: Verifying that a Ghost 9 restore works fine
Reply #4 - Jan 15th, 2007 at 11:14am
 
I disconnected the original drive, booted from the Ghost 9 disc and restored two images to a spare drive,
one off a CD (image of a new installed Windows) and one off a backup drive that's connected all the time
(image of the drive after installing all the programs and organizing the files).

The only problem was that I had to load Windows from the spare drive before restoring
because the backup drive had no letter when the original drive was disconnected
(and so not accessible through the Ghost boot environment).
 
 
IP Logged
 
Rad
Radministrator
*****
Offline


Sufferin' succotash

Posts: 4090
Newport Beach, California


Back to top
Re: Verifying that a Ghost 9 restore works fine
Reply #5 - Jan 15th, 2007 at 1:16pm
 
your 2nd paragraph is interesting.

would u be so kind as provide some detail?

i take it your "back-up drive" and your "spare drive" are two different drives, yes?

these are physically different hard disks?

could you describe the partitioning on each?

what type of drives? ide/ata? sata? any usb?

the back-up drive you mention had no letter cuz it was not partitioned & formatted? .. in other words, cuz it was a new (blank) drive?

i ask cuz, you should be able to restore an image to a new, blank drive .. at least with ghost 2003, you can. maybe ghost 9 requires a different strategy. i am not (yet) familiar with ghost 9.
 
WWW  
IP Logged
 

Guy...
Ex Member




Back to top
Re: Verifying that a Ghost 9 restore works fine
Reply #6 - Jan 16th, 2007 at 3:28am
 
Yeah they are physically different hard disks.
My backup drive is similar to the main drive (both WD 120GB SATA),
while the spare the drive is my old main drive. (Seagate Barracuda ATA III 30GB, connected through IDE)
Both aren't partitioned, while the main drive has 2 partitions
(one for the system, which I 'Ghosted', and one for the mp3/movies/etc).
The backup drive has its letter while in the main drive
(and it contains backups of Ghost & another program, + other files)
The spare drive wasn't empty when I restored to it, it was reformatted with Windows.
(By the way, I use Windows 2000.)
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print