Welcome, Guest. Please Login
 
  HomeHelpSearchLogin FAQ Radified Ghost.Classic Ghost.New Bootable CD Blog  
 
Page Index Toggle Pages: 1
Send Topic Print
Task log message after imaging with Ghost 2003 (Read 5068 times)
kallaweg
Ex Member




Back to top
Task log message after imaging with Ghost 2003
Apr 1st, 2007 at 9:37am
 
Everytime Icreate an image the task log pops up after the system reboots indicating that the selected task was completed with errors. The task in the task log is listed as UNKNOWN with a starttime of 1/1/1970 and a status of unknown.

Any help in eliminating this problem would be appreciated.

Thank you.
 
 
IP Logged
 

Rama
Technoluster
***
Offline


You don't appreciate Backup
until you get burned.

Posts: 156


Back to top
Re: Task log message after imaging with Ghost 2003
Reply #1 - Apr 1st, 2007 at 10:09am
 
Quote:
Everytime Icreate an image the task log pops up after the system reboots indicating that the selected task was completed with errors. The task in the task log is listed as UNKNOWN with a starttime of 1/1/1970 and a status of unknown.

Any help in eliminating this problem would be appreciated.

Thank you.



1. Do you have another copy of Ghost? If so have you tried imaging with it?
2. Have you tried imaging on a different computer with the same program?
3. Do you have a copy of another version of Ghost? If so did you try to image with it?

I hope we can localize the problem, then we can find a solution.

/me  Smiley
 
 
IP Logged
 
NightOwl
Radministrator
*****
Offline


"I tought I saw a puddy
tat..."

Posts: 5801
Olympia, WA--Puget Sound--USA


Back to top
Re: Task log message after imaging with Ghost 2003
Reply #2 - Apr 1st, 2007 at 10:28am
 
kallaweg

It sounds like you are using the Windows Ghost interface--and there appears to be something that is malfunctioning at least on the *time/date* aspect of logging the results of the procedure.

Have you performed an integrity check on the resulting image that your created--does it pass?  That would give you more confidence that your Ghost image is *good*, and it's just the Windows interface that is having problems.

This will sound an awful lot like the *Symantec Tech Support* answer for *everything*--have you tried uninstalling and re-installing Ghost.  That's not a bad suggestion to try *once*--but, if that doesn't work the first time--it probably won't if you try it again, and again , and again.... which is sometimes recommended by Symantec Tech Support!
 

____________________________________________________________________________________________

No question is stupid ... but, possibly the answers are Wink !
 
IP Logged
 
kallaweg
Ex Member




Back to top
Re: Task log message after imaging with Ghost 2003
Reply #3 - Apr 1st, 2007 at 1:07pm
 
If I shut down the computer and use a ghost boot floppy to boot and then take the image its reported as successful and it passes the integrity check. So as suggested, it does appear that the problem has to do with windows.

I also restored the image to a spare drive I have in my system and it appears that the image was restored without any problem, although after restoration the task log still reports errors with a date of 1/1/1970.
 
 
IP Logged
 
Page Index Toggle Pages: 1
Send Topic Print