Welcome, Guest. Please
Login
Home
Help
Search
Login
FAQ
Radified
Ghost.Classic
Ghost.New
Bootable CD
Blog
Radified Community Forums
›
Rad Community Technical Discussion Boards (Computer Hardware + PC Software)
›
Cloning Programs (Except Norton Ghost)
› MS Virtual PC and Imaging w/Ghost or Terabyte
(Moderators: Rad, Christer, NightOwl, Pleonasm, MrMagoo, El_Pescador)
‹
Previous Topic
|
Next Topic
›
Pages: 1
MS Virtual PC and Imaging w/Ghost or Terabyte (Read 15048 times)
Jerry aka Jer
Gnarly
Offline
Circuit_Rider
Posts: 42
Sunny Florida
Back to top
MS Virtual PC and Imaging w/Ghost or Terabyte
May 8
th
, 2009 at 9:26pm
I am thinking about starting from scratch in rebuilding my HD setup on a virtual drive. In this case I would use MS's Virtual PC. It is my wish, while continuing to use my current setup on the main drive in my desktop to rebuild a new setup on the virtual drive? Then when finished with all the software setups or installs, could I use Ghost (2003) or Terabyte's Image for Linux to make an image of the new virtual drive setup? Would it be possible thereafter to use, or copy that image to a fresh drive in the same box that I could boot up and use with all my software recently set up on it. If this was possible, I would have the least interruption of my work while at the same time intermittently working on the new setup. Since my knuckles are still smarting from a recent reprimand on this forum, I promise not to discuss these questions or any answers with anyone other than in the open format herein ... sincerely
Jerry aka/Jer
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #1 -
May 9
th
, 2009 at 3:47pm
@
Jerry aka Jer
TeraByte has a web page on creating a VirtualPC machine from a physical WinXP or Vista machine. There is nothing on the reverse procedure which is what you are planning.
http://www.terabyteunlimited.com/howto/index.htm
IP Logged
Dan Goodell
Special Guest
Offline
Posts: 552
N California
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #2 -
May 9
th
, 2009 at 6:09pm
"Would it be possible thereafter to use, or copy that image [of the virtual machine] to a fresh drive in the same box that I could boot up and use..."
I've never tried it, but it looks like the tutorial, "Installing Windows Drivers with TBOSDT for DOS/TBOS" (on the same page as Brian's link) might be what Jerry is looking for.
As I read that tutorial, Jerry would need to clone his rebuilt virtual machine to the new physical hard disk, get the right storage drivers for his physical machine (e.g., SATA drivers?), use the tutorial's method to get the storage drivers installed, then boot the new hard disk to safe mode and deal with any other driver issues (video, sound, et al).
IP Logged
Jerry aka Jer
Gnarly
Offline
Circuit_Rider
Posts: 42
Sunny Florida
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #3 -
May 9
th
, 2009 at 9:41pm
I am a novice here, so bear with me. Are we saying that any image of the virtual drive would not pick or include the the drivers? It is desired that any image created would be transferred to a new hard drive, but in the same computer with same MB, etc
Jerry
IP Logged
Dan Goodell
Special Guest
Offline
Posts: 552
N California
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #4 -
May 10
th
, 2009 at 1:57am
"It is desired that any image created would be transferred to a new hard drive, but in the same computer with same MB, etc"
Ah, but that's the point--it's
not
the same computer. A virtual machine is a different computer--with a different video adapter, different sound adapter, different network adapter... sometimes even a different storage subsystem.
All of those devices are
emulated
in Virtual PC, and are (usually) not the same as the real devices in your physical computer. Even the BIOS and motherboard chipset are emulated. For example, XP installed in a virtual machine will think the machine has a S3 Trio video card, regardless of your physical video card, so setup will install the S3 driver. If you subsequently clone the XP system from the virtual machine to the physical machine, XP will recognize the "machine" it is now on no longer has a S3 video adapter, and you'll have to deal with installing the drivers for the "found new hardware" devices XP will discover on the physical computer.
Virtualization isn't really the stumbling block here. Think of a virtual machine as simply a different computer, with different hardware from your real computer. What you're dealing with is the same problem as cloning XP from an old computer to a new computer with different hardware.
IP Logged
Pleonasm
Übermensch
Offline
Posts: 1619
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #5 -
May 10
th
, 2009 at 9:12am
Jerry, if I understand your objective correctly, you wish to perform a virtual-to-physical (V2P) backup image restore. I don’t believe that any edition of Ghost has this capability, although Backup Exec System Recovery and ShadowProtect Desktop do (and maybe other products, of which I am not aware).
I have not performed a V2P restore, but have done several P2V restores (in Windows XP and Windows Vista on VMware Workstation with ShadowProtect) that have worked.
ple • o • nasm
n. “The use of more words than are required to express an idea”
IP Logged
Jerry aka Jer
Gnarly
Offline
Circuit_Rider
Posts: 42
Sunny Florida
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #6 -
May 10
th
, 2009 at 11:56am
THANKS ... to all of you on this one. I am still learning. As can be deciphered from my post, I had a totally different concept of what a virtual is. Your post Dan helped clear this up and Pleo has turned me to looking in a different direction ... or maybe to even giving up on this one.
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #7 -
May 10
th
, 2009 at 3:25pm
Jerry,
I haven't tried a Virtual to Physical restore but I have used the script that Dan mentioned.
http://www.terabyteunlimited.com/howto/howto-drvins-tbosdt-dos.htm
My most interesting restore was from an 8 year old Gateway computer with IDE HDs to a 2 year old Dell computer with SATA HDs. Your restore would follow the sequence Dan outlined. I think it's possible and it would be simple to test. Install your OS to the Virtual machine, image the Virtual machine, restore the image to a spare HD, run the script and change the HAL if you have a dual core processor. The OS should boot and run the "found new hardware" sequence. If everything is OK you could then decide whether it's worth proceeding with installing programs etc to the Virtual machine.
Have a look at the video (Create a VirtualPC Machine from a Physical XP Machine) to see what you will need to do in reverse.
http://www.terabyteunlimited.com/howto/index.htm
IP Logged
Jerry aka Jer
Gnarly
Offline
Circuit_Rider
Posts: 42
Sunny Florida
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #8 -
May 11
th
, 2009 at 7:04pm
Thanks to all for their observations on the question. Sounds all a bit complicated to a novice, and, perhaps requiring some additional outlay of ca$h for appropriate software. For now, I guess I'll have to put this project on the shelf and come back to it later. I do have an extra hard drive and swapping it ... in and out with my current system drive as I rebuild might be the best approach
Jer
IP Logged
NightOwl
Radministrator
Offline
"I tought I saw a puddy
tat..."
Posts: 5826
Olympia, WA--Puget Sound--USA
Back to top
Re: MS Virtual PC and Imaging w/Ghost or Terabyte
Reply #9 -
May 13
th
, 2009 at 9:58am
@
Jerry aka Jer
Quote:
I do have an extra hard drive and swapping it ... in and out with my current system drive as I rebuild might be the best approach
As all things with PC computers--there's usually more than one way to approach a project--
Does your system allow you to select which HDD you boot from--some of the newer ones do. You could simply change which HDD is booted from, and then you'd have two parallel systems to work from. You'd have to work out exactly how to do that--I don't have such a system, so can't say what issues or problems you may have to work out!
Alternatively, I have used *multi-booting*--this is where you have separate OS systems installed on a single system--and depending on how you *multi-boot* (there are multiple ways!)--the two (or more) OSs are booted independently from each other--so you select which system to boot up to. When I first switched to WinXP from Win98se--that's how I did it--experimented with WinXP until I was comfortable that everything was working okay--and booting back to Win98se as my main working OS. I've not booted to Win98se in a couple years now!
____________________________________________________________________________________________
No question is stupid ... but, possibly the answers are
!
IP Logged
Pages: 1
‹
Previous Topic
|
Next Topic
›
« Home
‹ Board
Top of this page
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
Rad Community Technical Discussion Boards (Computer Hardware + PC Software)
- Norton Ghost 15, 14, 12, 10, 9, + Norton Save + Restore (NS+R)
- Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board
- Cloning Programs (Except Norton Ghost) ««
- NightOwl's Bootable CD/DVD
- PC Hardware + Software (except Cloning programs)
Rad Community Non-Technical Discussion Boards
- The Water Cooler
- YaBB Forum Software + Rad Web Site
Radified Community Forums
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.