This is how i made a bootable USB of Ghost.
1. Format the USB with Fat32 file format.
2. Boot the system using Win98 SE bootable CD or floppy disc. The floppy disc image can be obtained from
www.bootdisk.com.
3. Once the system boots using floppy/CD use the CD-rom support option from the menu.
4. Assuming D: is you USB drive letter. type the following command:-
sys D:This will copy the necessary dos files to boot the usb. The alternate option is to use
format D: /sThe s switch will copy the system files USB drive.
5. exit the system and restart the system and boot again into CD/floppy drive. Now start the fdisk and make the USB drive as active partition.
6. Restart the system now into normal mode and you can copy all the files like Ghost executable etc in this USB.
7. To boot from USB you need to enable USB boot option in BIOS.
Regards,
K Singh.