Radified Community Forums - Ghost 10 & Corrupt Recovery Environment

leesiulung

Ex Member

Ghost 10 & Corrupt Recovery Environment
Mar 21^st, 2007 at 1:41pm

Hi,

I searched, but did not find the answer to my problem. Anyhow, I recently purchased Ghost 10 to image my new computer. Upon boot up from Ghost 10 CD with both my SATA hard drives connected and starting classic Ghost 8.2 it always stops and says that some files are corrupted.

Oddly enough, if I only have one drive connected it boots from the Ghost 10 CD just fine and does all the functions perfect including creating and restoring images in classic Ghost 8.2. Also booting from CD with both SATA drives connected takes a significant longer time than with one drive connected.

Since I eventually wanted to backup a RAID array I tried booting up from the CD again and hitting F6 to give it the drivers. This is after I enabled RAID (with the two drives) in BIOS and made sure Windows has the correct drivers. Anyhow, giving it the correct drivers and selecting the two drivers needed for my setup it prompts me for a file that is clearly on the floppy. It won't continue without this.

I'm wondering what is going on here?

My setup
2x WD RE SATA Drives
nForce 590 motherboard (nvidia designed board)

I tried following advice from FAQ, but can't find the AHIC mode or compatibility mode in my BIOS. There are very few SATA settings, but the ones there are

"Extended IDE Drive" possible setting: None or Auto
"Access Mode" possible setting: Large or Auto

Anyone have any ideas?

I'm thinking the drivers that loads from the CD is incompatible with my board and gives corrupt data.... But that also prevents me from loading the correct drives. I could try and create a new cd, but it sound awfully difficult.

Please help, as I spent so much time already.

IP Logged

Brian

Demigod

Offline

Posts: 6340
NSW, Australia

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #1 - Mar 21^st, 2007 at 5:47pm leesiulung, Others have had problems with nForce MBs. See http://radified.com/cgi-bin/YaBB/YaBB.cgi?board=ghost9_10;action=display;num=117... http://radified.com/cgi-bin/YaBB/YaBB.cgi?board=ghost9_10;action=display;num=117... A new CD from Symantec may be the answer.
	IP Logged

leesiulung

Ex Member

Back to top

Re: Ghost 10 & Corrupt Recovery Environment
Reply #2 - Mar 22^nd, 2007 at 1:29am

Brian, thank you for helping me out.

I actually found the solution to this. After chatting with Symantec support which happens to be pretty decent. This could be because my problem perhaps was pretty obvious. As I thought it was related to drivers. The technician recommended I run Driver Validation tool from the disc. Lo and behold, a bunch of drivers were missing from the disc. Contact Symantec to get a custom GHOST CD and my problem seems so far to have disappeared. I will report back once I make an image of a RAID-1 array.

Here are instructions to obtain a Custom Ghost Recovery Disk:

http://service1.symantec.com/SUPPORT/powerquest.nsf/0/4428046f6aa2d7108825719a00...

By the way, the return time on the ISO image for the CD disc was amazingly fast. Within 2-hours. I'm impressed!!! Cudos to Symantec.

Hope these instruction helps someone else too.

IP Logged

Brian

Demigod

Offline

Posts: 6340
NSW, Australia

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #3 - Mar 22^nd, 2007 at 2:54am leesiulung, Thank you. I haven't seen that link before. It will be a BIG help.
	IP Logged

MikeHawthorne

Gnarly

Offline

I love YaBB 1G - SP1!

Posts: 32

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #4 - Mar 24^th, 2007 at 10:13pm Hi They have a whole page of the things, once they see your specs they will tell you which one to download. I just went through this whole thing. Boot like a champ now. Mike
	IP Logged

leesiulung

Ex Member

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #5 - Mar 29^th, 2007 at 11:14pm Just wanted to report that the disc works wonderfully. I'm glad this is helpful. The new form threw me off and i couldn't login to the old forum. I'm not sure I like the interface of the new one.
	IP Logged

NightOwl

Radministrator

Offline

"I tought I saw a puddy
tat..."

Posts: 5826
Olympia, WA--Puget Sound--USA

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #6 - Mar 30^th, 2007 at 1:04am leesiulung Quote: I'm not sure I like the interface of the new one. Hum along while rocking back and forth: Change is good, change is good, change is good.... You can change the look of the forum in your Profile Options--we're still tweaking the functions and appearance.
	____________________________________________________________________________________________ No question is stupid ... but, possibly the answers are ! IP Logged

Pleonasm

Übermensch

Offline

Posts: 1619

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #7 - Apr 1^st, 2007 at 10:33am RE: "After chatting with Symantec support which happens to be pretty decent" (Reply #2) It is worth noting that not every interaction with Symantec support is perceived negatively. Indeed, if more individuals reported their positive experiences, a more balanced viewpoint on the issue might emerge.
	ple • o • nasm n. “The use of more words than are required to express an idea” IP Logged

John.

Übermensch

Offline

Posts: 2072

Back to top

Re: Ghost 10 & Corrupt Recovery Environment
Reply #8 - Apr 1^st, 2007 at 3:08pm

Quote:

It is worth noting that not every interaction with Symantec support is perceived negatively. Indeed, if more individuals reported their positive experiences, a more balanced viewpoint on the issue might emerge.

But would that constitute a scientific conclusion?

I guess you would probably still agree with your previous statement/post:
Quote:

From my perspective, unscientific polls and the missives of scatted users on forums are nothing more than “random noise.” As a consequence, I personally would not use such “evidence” to argue either “for” or “against” the hypothesis of Symantec’s performance on customer service.

Ghost4me Ghost 9, 10, 12, 14, 15. Windows XP, Vista, Windows 7

IP Logged

NightOwl

Radministrator

Offline

"I tought I saw a puddy
tat..."

Posts: 5826
Olympia, WA--Puget Sound--USA

Back to top

Re: Ghost 10 & Corrupt Recovery Environment
Reply #9 - Apr 1^st, 2007 at 3:37pm

Ghost4me

Quote:

Quote from Pleo on Feb 2nd, 2007, 8:57am:

From my perspective, unscientific polls and the missives of scatted users on forums are nothing more than “random noise.” As a consequence, I personally would not use such “evidence” to argue either “for” or “against” the hypothesis of Symantec’s performance on customer service.

On a *fishing trip* to see if the *Pleo fish* will *bite*?!!!! Grin

____________________________________________________________________________________________

No question is stupid ... but, possibly the answers are Wink

!

IP Logged

John.

Übermensch

Offline

Posts: 2072

Back to top

	Re: Ghost 10 & Corrupt Recovery Environment Reply #10 - Apr 1^st, 2007 at 3:41pm NightOwl wrote on Apr 1^st, 2007 at 3:37pm: On a fishing trip to see if the Pleo fish will bite?!!!! Of course. Just part of our long established friendly repartee. (I think we both actually enjoy it!)
	Ghost4me Ghost 9, 10, 12, 14, 15. Windows XP, Vista, Windows 7 IP Logged

	Welcome, Guest. Please Login