Welcome, Guest. Please
Login
Home
Help
Search
Login
FAQ
Radified
Ghost.Classic
Ghost.New
Bootable CD
Blog
Radified Community Forums
›
Rad Community Technical Discussion Boards (Computer Hardware + PC Software)
›
Norton Ghost 15, 14, 12, 10, 9, + Norton Save + Restore (NS+R)
› WinXp immediately Opens & Closes after Cloning
(Moderators: Rad, Christer, NightOwl, Pleonasm, MrMagoo, El_Pescador)
‹
Previous Topic
|
Next Topic
›
Pages:
1
2
WinXp immediately Opens & Closes after Cloning (Read 46925 times)
taderbush
N00b
Offline
I Love Radified!
Posts: 7
Los Angeles
Back to top
WinXp immediately Opens & Closes after Cloning
Apr 3
rd
, 2007 at 9:42pm
Need some help. I have copy of Ghost 9.0 and used the copy wizard screen to copy/clone my SCSI 36GB 10,000 RPM single partition Seagate onto a 36GB 15,000RPM HD. Checked "set drive active" I moved ~12GB into the new HD and everything went OK. Pulled out the source drive re-set everything to boot from it, and it goes fine for a while. I get the normal screen that you get waiting for Xp to open, but it then after a pause which it looks like it is about to begin, it goes into a screen that says loading your personal files and then immediately switches into-- Windows is saving your files and says it is shutting down. It then hangs at that point.
I have done & Re-done this 5-6 times. I formated the new drive into one primary partition (same as source) tried everything I know. Tried to go into safe mode but won't do that. Tried several times checking & unchecking the copy MBR but it won't get out of this mode. Got out the Xp installation disk and tried the repair/recovery activities but could not get them to work.
I don't have a very complex hard drive/partition situation so I'm puzeled on why it won't continue into the desktop and start? My mouse works while this all is happening. Its the only thing that responds.
I have read the FAQ's and have done a search but never seen a computer behave in this manner.
I'd like to use the faster hard drive and my first experience with Norton Ghost 9.0 is not a happy one. Any suggestions?
IP Logged
Rad
Radministrator
Offline
Sufferin' succotash
Posts: 4090
Newport Beach, California
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #1 -
Apr 3
rd
, 2007 at 9:59pm
Have you seen this?
http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1117581957
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #2 -
Apr 3
rd
, 2007 at 10:00pm
taderbush,
It's not entirely typical but it sounds like you have drive letter problems. This occurs with Ghost 9 if you copy into a partition. The new OS doesn't see itself as C: drive. I see you are copying into a partition now but was the first copy into a partition as well?
http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1117581957
http://radified.com/cgi-bin/yabb2/YaBB.pl?num=1148252120
http://www.goodells.net/multiboot/partsigs.htm
http://www.goodells.net/multiboot/partsigs.htm#method3
I'd delete all partitions on your new HD and then follow the Ghost 9 instructions above. It should work. Or you could try the Method #3 technique. That will be a lot quicker.
IP Logged
dbird
Gnarly
Offline
Posts: 47
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #3 -
Apr 3
rd
, 2007 at 10:03pm
I had a very similar problem on an XP restore. I had to do the restore from the ghost boot CD. The "restore mbr" was greyed out when I tried any other method.
Make sure that you have SCSI drivers available to do an F6 floppy load if you need them. I have no idea if the ghost boot CD installs SCSI drivers by default or by sensing them or by user direction only. I do know that RAID drivers require user loading; RAID shows as SCSI in the oem text file.
The F6 window goes by pretty fast; while the plaintext progress bar is going across. So, you have to be alert. I found that the hard way.
Good luck,
Dave
IP Logged
Old_Peskie
Ex Member
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #4 -
Apr 3
rd
, 2007 at 10:12pm
taderbush wrote
on Apr 3
rd
, 2007 at 9:42pm:
"... Need some help..."
taderbush
-
I thank yew haf cum tu tha rite plase for sum halp, sho' 'nuff
Old_Peskie
IP Logged
taderbush
N00b
Offline
I Love Radified!
Posts: 7
Los Angeles
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #5 -
Apr 3
rd
, 2007 at 10:58pm
Yea, I did read the link. Did not find any clues to my issue. Perhaps I'm not smart enough or just blind.
I also thought I followed the instructions "perfectly" on Ghost 9 steps. I have only one partition on both drives. I try to follow the KIIS formula. I formatted it into one primary partition just before I copied the contents onto the HD.
When I looked, I had two active drives C: and I: according to Ghost. I would assume Xp would re-assign the drive letter back to C: when I pulled the original HD out. The SCSI does not really assign letters but gives numbered letters an in this instance, it is configured as drive "0".
If it was confused about the drive letter(s) I would not think it would get as far in the booting process as it does. It is "almost" ready to give me the Desktop, (I can hear it loads the audio card clicking) and then it jumps immediately into the mode where it tries to shut down with the messages (Loading your files and then saving your settings) flashed and displayed. Then it just hangs silently for about 3 minutes and you then get a loop of windows shutdown wav sound.
If it were a drive letter assignment issue, I'd think you would never get that far into the booting process?
Still baffled.
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #6 -
Apr 3
rd
, 2007 at 11:50pm
I'm still not clear that you copied into Unallocated Space. You mentioned.
Quote:
I formatted it into one primary partition just before I copied the contents onto the HD.
You also mentioned..
Quote:
I had two active drives C: and I: according to Ghost.
If you saw that then when you swap drives the new HD won't boot.
Are you sure you followed the instructions?
I agree that your WinXP is rebooting late. It usually reboots at the Welcome Screen stage. Humour me. Try Method #3.
IP Logged
taderbush
N00b
Offline
I Love Radified!
Posts: 7
Los Angeles
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #7 -
Apr 4
th
, 2007 at 12:30am
Brian,
I don't see where method #3 applies. It, by my reading, refers to when you have had multiple partitions on a single drive. Not my case. I copied the entire contents of C: (36GB) drive (one partition only) into the one partition formatted active primary drive of 36GB. Both drives have never had more than one partition.
If it were a C: vs I: drive recognition problem, I can't see where the mouse would work, the sound card spits out "goodby" into my speakers. It in my mind, it would give me an error that it can't find OS or give a boot error message.
If it was unallocated, I presume you can't use it? Means it is not formatted? I think I allocated it space to one ~36GB active partition.
How can I stop the action of the shutting down midstream? Then I might be able to fix it.
IP Logged
NightOwl
Radministrator
Offline
"I tought I saw a puddy
tat..."
Posts: 5826
Olympia, WA--Puget Sound--USA
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #8 -
Apr 4
th
, 2007 at 1:46am
taderbush
Quote:
It, by my reading, refers to when you have had multiple partitions on a single drive.
You probably need to read a little more carefully! It's not so much that the HDD has more than one partition, but that the system has more than one partition present--each being assigned a drive letter and remembered in the Registry!
What you have not yet understood is how WinXP assigns and remembers drive letter assignments.
Drive letters are remembered in the Registry--it's based on recognizing a HDD based on it's *NT-signature* that's recorded in the Master Boot Record (MBR) of the first absolute sector of each HDD.
If your *new, cloned* HDD has already been formatted, then your WinXP Registry already *knows* that it's drive letter is *I*, no matter what you have copied to that HDD--but the various other Registry calls during boot are looking for the HDD that it knows to be drive letter *C:\*--but that HDD is no where to be found if you have removed it from the system--when WinXP checks to see what partitions are to be found on the system--C:\ as defined in the Registry by its *NT-signature* is not present--so each system call that says *load program xyz from drive C:\* fails--because only the partition known by the Registry to be present is *drive I:\*!
Out of curiosity, is your mouse USB?--is it being supported by the BIOS in the early boot phase, as opposed to being available because Windows has already loaded the mouse support? Sound card--who knows....I'd have to know more about your actual system setup to understand better--and even then I may very well still not understand....
Quote:
If it was unallocated, I presume you can't use it?
Ghost has the uncanny ability to *see* available unallocated space to perform its wizardry upon!
Humor the *Brian*!
____________________________________________________________________________________________
No question is stupid ... but, possibly the answers are
!
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #9 -
Apr 4
th
, 2007 at 4:14am
I feel confident I'll be humoured. Or humored if I was in a different country.
IP Logged
NightOwl
Radministrator
Offline
"I tought I saw a puddy
tat..."
Posts: 5826
Olympia, WA--Puget Sound--USA
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #10 -
Apr 4
th
, 2007 at 8:50am
Brain
G'day Mate! I was unaware of that difference! I glossed over the spelling in your post without it even registering!
Is the pronunciation more the *our* or *or* sound--or the *mer* sound suggested in the dictionary pronunciation key?
Dictionary.com--
Humour
Dictionary.com--9 results for:
-or
____________________________________________________________________________________________
No question is stupid ... but, possibly the answers are
!
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #11 -
Apr 4
th
, 2007 at 2:56pm
NightOwl, I think it's pronounced the same in Australia as in the US. The final "our" tends to be a slur of "mer" and "or". We follow the British spelling but I think US spelling is more sensible although it is not becoming more commonplace here. Which do you prefer, oesophagus or esophagus. Probably neither.
Despite our spelling differences, accents aside, pronunciations are usually the same.
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #12 -
Apr 4
th
, 2007 at 3:39pm
I meant to post this information earlier. If you don't have a floppy drive to run fdisk /mbr then you can clear the DiskID with a boot CD. There are several ways to do this but the easiest is to use a free download from Acronis. The file is called "mbrautowrite_en.iso". It contains fxdisk.
http://www.acronis.com/files/support/mbrautowrite_en.iso
Download the .ISO and burn it (as an image, not as data) to a CD.
Boot to the CD
You will see "press any key to rewrite MBR" followed by a flashing cursor
After you press a key there are a few more lines of text finishing with
Press <Enter> to reboot...
Remove the CD before you press Enter
I've tried this CD and it does the same things as fdisk /mbr. Rewrites boot code and clears the DiskID.
"Clear Sig" from BING, clears the DiskID without rewriting boot code. Convenient if you have a BING CD.
http://www.terabyteunlimited.com/bootitng.html
IP Logged
John.
Übermensch
Offline
Posts: 2072
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #13 -
Apr 4
th
, 2007 at 10:33pm
Brian wrote
on Apr 4
th
, 2007 at 3:39pm:
"Clear Sig" from BING, clears the DiskID without rewriting boot code. Convenient if you have a BING CD.
http://www.terabyteunlimited.com/bootitng.html
I couldn't find "Clear Sig" on their website. Do you have to purchase the full package or is it available separtely?
Ghost4me Ghost 9, 10, 12, 14, 15. Windows XP, Vista, Windows 7
IP Logged
Brian
Demigod
Offline
Posts: 6345
NSW, Australia
Back to top
Re: WinXp immediately Opens & Closes after Cloning
Reply #14 -
Apr 4
th
, 2007 at 10:53pm
John, Clear Sig is part of BING. There is a 4 week trial period. BING is one of the smartest apps that I've used. Partitioning, Boot Manager, Image/Restore, edit boot.ini, MBR backup etc, etc.
Quote:
What You Can Do With BootIt Next Generation (BING)
While you can read a detailed description of each BootIt NG feature in Using BootIt NG on page
14, the following is a brief overview of just some of the many tasks you can accomplish using
BootIt NG:
• Create over 200 primary partitions (if desired).
• Configure detailed boot items to fit your needs.
• Boot from any partition or volume on up to eight hard drives.
• Boot multiple operating systems from a single file allocation table (FAT) or FAT32 partition.
• Logically swap the boot hard drive to look like the first.
• Logically swap floppy disk drives.
• Boot from drive A or B on the fly.
• Resize FAT, FAT32, and NTFS file system partitions without data loss.
• Convert between FAT and FAT32 without data loss.
• Format FAT or FAT32 partitions or volumes.
• Create volumes in extended partitions.
• Set up users and passwords.
• Create compressed images of your partitions (includes USB 2.0 and IEEE 1394 support).
http://www.terabyteunlimited.com/kb/article.php?id=178
IP Logged
Pages:
1
2
‹
Previous Topic
|
Next Topic
›
« Home
‹ Board
Top of this page
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
Rad Community Technical Discussion Boards (Computer Hardware + PC Software)
- Norton Ghost 15, 14, 12, 10, 9, + Norton Save + Restore (NS+R) ««
- Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board
- Cloning Programs (Except Norton Ghost)
- NightOwl's Bootable CD/DVD
- PC Hardware + Software (except Cloning programs)
Rad Community Non-Technical Discussion Boards
- The Water Cooler
- YaBB Forum Software + Rad Web Site
Radified Community Forums
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.