Welcome, Guest. Please
Login
Home
Help
Search
Login
FAQ
Radified
Ghost.Classic
Ghost.New
Bootable CD
Blog
Radified Community Forums
›
Rad Community Technical Discussion Boards (Computer Hardware + PC Software)
›
Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board
› Won't restore from Nero copy CD
(Moderators: Rad, Christer, NightOwl, Pleonasm, MrMagoo, El_Pescador)
‹
Previous Topic
|
Next Topic
›
Pages: 1
Won't restore from Nero copy CD (Read 27867 times)
Notaclue
Dude
Offline
I love YaBB 1G - SP1!
Posts: 12
Back to top
Won't restore from Nero copy CD
Jun 27
th
, 2005 at 6:12pm
Hi,
I have made a Ghost XP image of my C Drive using the split command, and saved it successfully on Drive D.
I did a test restore to the C drive using a normal Ghost 2003 DOS boot floppywhich was sucvcessful.
I then copied the 3 Ghost files onto a DVD using Nero:
scsi.gho
SCSI0001.GHS
SCSI0002.GHS
I rebooted using the Ghost boot DOS floppy , selected the Nero DVD and tried to restore.
It came up with an error message which simply stated that the DVD was not created with Ghost.
I would apreciate someone explaining how I can restore from DVD.
Secondally, I wish to back up the 100Gig partition onto 8.5 gig DVD+ 's.
I was trying to understand how I could split this across DVD's using the spit command. (I wasnt sure whether SPAN is the same thing). This seems limited to 2048Mb.
What split command line do I need to enter to sussessfully burn the 100Gig across the DVDs?
Thanks
IP Logged
NightOwl-
Übermensch
Offline
"I tought I saw a puddy
tat...."
Posts: 2094
Olympia, WA--Puget Sound-USA
Back to top
Re: Won't restore from Nero copy CD
Reply #1 -
Jun 27
th
, 2005 at 9:24pm
Notaclue
If you use any program other than Ghost itself to burn images to the optical media, Ghost will choke and say it's not a Ghost image or a Ghost image can not be found, if later booting from the 'Standard Ghost Boot Disk'.
If you boot from the Windows Ghost interface, Windows Ghost adds the needed drivers that 1. mount the optical drive in DOS, and 2. assign a drive letter to the mounted optical drive--and you will be able to use those images without problems.
In order to boot to DOS from floppys, instead of the 'Standard Ghost Boot Disk', you need the two floppy boot disk set 'CD/DVD Startup Disk with Ghost' because it will have the necessary drivers to 1. mount the optical drives, and 2. assign drive letters to the optical drives.
2048 MB's (2 GB's) is the max size, but you can make them smaller. Let's see........probably ( 8 ) 1 1/16th GB files would give you 8.5 GB's, but usually you need a little bit of extra room for files system bookkeeping. And 1/16 times 1024 = 64 MB's.
1024 + 64 = 1088 MB's. So maybe 1080 MB split command.
If Ghost writes these directly to DVD, it will make them all 2048 except for the last file that will be smaller to fit the media capacity. You can use Ghost Explorer to split or enlarge image file sizes--but, if you have large video files, Ghost Explorer seems to fail with those sometimes. You will have to experiment to see what works--
and always do a final image integrity check before you assume you have a good image set.
No question is stupid...but, possibly the answers are
!
(This is an old *NightOwl* user account--not in current use. Current account is NightOwl without a dash at the end.)
IP Logged
Rad
Radministrator
Offline
Sufferin' succotash
Posts: 4090
Newport Beach, California
Back to top
Re: Won't restore from Nero copy CD
Reply #2 -
Jun 28
th
, 2005 at 3:17am
Might find JHouston's post helpful:
http://radified.com/cgi-bin/YaBB/YaBB.cgi?board=general;action=display;num=10899...
7th post down.
IP Logged
Notaclue
Dude
Offline
I love YaBB 1G - SP1!
Posts: 12
Back to top
Re: Won't restore from Nero copy CD
Reply #3 -
Jun 28
th
, 2005 at 4:44am
Thanks YABBC!
Very helpful
IP Logged
Notaclue
Dude
Offline
I love YaBB 1G - SP1!
Posts: 12
Back to top
Re: Won't restore from Nero copy CD
Reply #4 -
Jun 28
th
, 2005 at 4:47am
Oops ! need more coffee...
Thanks Guys. Very clear, and I'll check out the references.
8)
IP Logged
Notaclue
Dude
Offline
I love YaBB 1G - SP1!
Posts: 12
Back to top
Re: Won't restore from Nero copy CD
Reply #5 -
Jun 28
th
, 2005 at 7:06pm
Rad wrote
on Jun 28
th
, 2005 at 3:17am:
Might find JHouston's post helpful:
http://radified.com/cgi-bin/YaBB/YaBB.cgi?board=general;action=display;num=10899...
The web site link gave Excellent help...
but... Nearly there...
I have a SCSI drive and 2 IDE drives.
Booting off the Floppy or CD allows me to see the CD (Atapi) but not the C drive (scsi) working of an Adaptec 2910
I guess the issue is DOS drivers?
Is that the way to go.. and got any suggestions?
Thanks again.. I'd be up creek without you all.
8)
IP Logged
NightOwl-
Übermensch
Offline
"I tought I saw a puddy
tat...."
Posts: 2094
Olympia, WA--Puget Sound-USA
Back to top
Re: Won't restore from Nero copy CD
Reply #6 -
Jun 28
th
, 2005 at 7:49pm
Notaclue
In your initial post, you said you created an image of the scsi HDD and were able to restore to it using the 'Standard Ghost Boot Disk'.
What have you changed so that you now have an issue with accessing the scsi HDD?
No question is stupid...but, possibly the answers are
!
(This is an old *NightOwl* user account--not in current use. Current account is NightOwl without a dash at the end.)
IP Logged
Notaclue
Dude
Offline
I love YaBB 1G - SP1!
Posts: 12
Back to top
Re: Won't restore from Nero copy CD
Reply #7 -
Jun 29
th
, 2005 at 4:00pm
Hi NightOwl,
The only fifference was that when creating I used the Ghost 2003 CD.
When restoring I used a boot DVD I had created. This can be found by following the link Rad described to
« Reply #2 on: 28. Jun 2005 at 01:17 »
Quote
Might find JHouston's post helpful:
http://radified.com/cgi-bin/YaBB/YaBB.cgi?board=general;action=display;num=10899...
...and then followubg the link to the procedure described by rgng. - satcp/ghostresq01.htm
. i.e...
Re: Ghost 2003 won't recognize a drive
« Reply #1 on: 16. Jul 2004 at 01:47 » Quote Modify
--------------------------------------------------------------------------------
http://users.pandora.be/satcp/ghostresq01.htm
I guess if it is ados driver issue any useful link to the dos driver wold be helpful
Thanks
8)
IP Logged
NightOwl-
Übermensch
Offline
"I tought I saw a puddy
tat...."
Posts: 2094
Olympia, WA--Puget Sound-USA
Back to top
Re: Won't restore from Nero copy CD
Reply #8 -
Jun 29
th
, 2005 at 8:59pm
Notaclue
Quote:
when creating I used the Ghost 2003 CD
Clarify a couple things...
1. Your drive D: is your DVD optical writer drive?
2. The Ghost CD is a stand-alone CD with Ghost--not Norton SystemWorks with Ghost--correct?
3. When you boot the Ghost 2003 CD, did you get a PC-DOS menu and did you choose
'2. Load CD Drivers (IDE and SCSI)'
?
In you first post you said:
Quote:
I did a test restore to the C drive using a normal Ghost 2003 DOS boot
floppy
which was sucvcessful.
In your most recent post, you said:
Quote:
When restoring I
used a boot DVD
I had created.
4. These two quotes do not match--please clarify what you did for a successful restore from you original created image.
5. Did you try creating the 'CD/DVD Startup Disk with Ghost' using the Ghost Boot Wizard (that I mentioned in Reply #1 above), and booting from them to see if you could then access the image files on the DVD that you burned with Nero?
The reason I'm asking the above questions is that I'm trying to determine if you need DOS SCSI drivers for your setup or not.
No question is stupid...but, possibly the answers are
!
(This is an old *NightOwl* user account--not in current use. Current account is NightOwl without a dash at the end.)
IP Logged
Notaclue
Dude
Offline
I love YaBB 1G - SP1!
Posts: 12
Back to top
Re: Won't restore from Nero copy CD
Reply #9 -
Jun 30
th
, 2005 at 4:39pm
Hi NightOwl,
To answer your questions as best as I can..
1.
Your drive D: is your DVD optical writer drive?
.. It's a Sony 720DRU DVDWriter..is that an optical writer?
2.
The Ghost CD is a stand-alone CD with Ghost--not Norton SystemWorks with Ghost--correct?
Yes... purchase Ghost 9 and the free 2003 in the same box.
3.
When you boot the Ghost 2003 CD, did you get a PC-DOS menu and did you choose '2. Load CD Drivers (IDE and SCSI)'?
Before I answer, I would like to clarify that There are two CD's we are discussing. The first is the Genuine Ghost2003 CD, and the second is my home made bootable DVD which I made following the links.
a. When I boot the Dhost 2003, I get a PC dos menu and I chose option 2. By loading my second dvd immediately, I can run Ghost successfully from it and restore the image.
b: When I boot from my DVD (using the 'Windows 98 DOS)
I cannot see the SCSI drive.
Yes to creatring a Startiup disk, and they can see the images on the DVD or CD.
Is it worth me trying to burn another bootable DVD.? Maube I've made a mistake.
Look forward to your reply.
IP Logged
NightOwl-
Übermensch
Offline
"I tought I saw a puddy
tat...."
Posts: 2094
Olympia, WA--Puget Sound-USA
Back to top
Re: Won't restore from Nero copy CD
Reply #10 -
Jul 1
st
, 2005 at 1:26am
Notaclue
Quote:
I did a test restore to the C drive using a normal Ghost 2003 DOS boot floppywhich was sucvcessful.
I'm still not sure you have clarified the above statement--what do you mean by 'a normal Ghost 2003 DOS boot floppy'?
In you last post, it sounded like if you booted with a boot disk that had 'SCSI' support of CD-ROM (optical drives), then your SCSI HDD's were also visible. (The Ghost 2003 CD, if used for booting, and you choose choice #2, you load SCSI drivers for CD-ROM optical drives. And, the two disk set created using the Ghost Boot Wizard to make the ''CD/DVD Startup Disk with Ghost' also are loading drivers for SCSI CD-ROM optical drives.)
So, it sounds like you need to add those SCSI drivers to any bootable disk you want to use if you want to see your SCSI HDD's.
http://users.pandora.be/satcp/ghostresq01.htm
Quoting from the above reference:
Quote:
device=aspi2dos.sys
device=aspi8dos.sys
device=aspi4dos.sys
device=aspi8u2.sys
device=aspicd.sys /D:cdrom001
The first 4 lines load various Adaptec SCSI card drivers (including the 29xx series) and the last line is the generic Adaptec SCSI CD-ROM driver which works with all standard SCSI CD-ROM drives.
If you have a non Adaptec SCSI controller you will have to download the manufacturer's DOS drivers for that card and edit the CONFIG.SYS.
You can delete following files on the bootdisk to free space for the new drivers.
ASPI2DOS.SYS
ASPI4DOS.SYS
ASPI8DOS.SYS
ASPI8U2.SYS
ASPICD.SYS
The 5 lines in the CONFIG.SYS which load the Adaptec SCSI drivers can be replaced by following 2 lines:
device=xxxxx.sys
device=yyyyy.sys /D:cdrom001
Where xxxxx.sys is the SCSI card driver and yyyyy.sys the CD-ROM driver from your SCSI card's manufacturer. Don't forget to copy the drivers to the floppy disk too!
This explains what lines load the SCSI files in 'config.sys' and what changes need to be made if you have to load 'non-Adaptec' drivers.
Is this your SCSI adaptor?
http://www.adaptec.com/worldwide/support/suppdetail.jsp?sess=no&language=English...
If 'Yes', click on 'Download Drivers and Software' for DOS driver.... or search for your specific adaptor.
No question is stupid...but, possibly the answers are
!
(This is an old *NightOwl* user account--not in current use. Current account is NightOwl without a dash at the end.)
IP Logged
Pages: 1
‹
Previous Topic
|
Next Topic
›
« Home
‹ Board
Top of this page
Forum Jump »
Home
» 10 most recent Posts
» 10 most recent Topics
Rad Community Technical Discussion Boards (Computer Hardware + PC Software)
- Norton Ghost 15, 14, 12, 10, 9, + Norton Save + Restore (NS+R)
- Norton Ghost 2003, Ghost v8.x + Ghost Solution Suite (GSS) Discussion Board ««
- Cloning Programs (Except Norton Ghost)
- NightOwl's Bootable CD/DVD
- PC Hardware + Software (except Cloning programs)
Rad Community Non-Technical Discussion Boards
- The Water Cooler
- YaBB Forum Software + Rad Web Site
Radified Community Forums
» Powered by
YaBB 2.4
!
YaBB
© 2000-2009. All Rights Reserved.